Traxxas TRX-4 / Axial SCX10 II Aluminum Front Bumper Upgrade JR-TRX443 by Jazrider  [JR-TRX443]

Scale front bumper: aluminium construction with lights

This aluminium front bumper is tailored for Traxxas TRX-4 and Axial SCX10 II chassis and includes integrated LED lighting and recovery D-Rings. It offers functional front-end protection while providing tidy mounting positions for lights and light recovery equipment on scale trail vehicles.

Only the specified platforms are supported: Traxxas TRX-4 and Axial SCX10 II. The bumper makes use of the chassis front mounting points to replace or augment the stock bumper; confirm your chassis mounting pattern before beginning work. The installation requires standard hobby tools for light bracket assembly and wiring.

Fitment notes: remove the existing bumper, align this unit with the chassis mount holes, fasten with the supplied or equivalent hardware, and route LED cabling to a suitable power source such as a switched lighting output or small auxiliary pack. Check LED polarity during setup and secure wiring away from steering and suspension travel. Use the D-Rings for scale-style recovery purposes only and avoid loading them as full towing points.

Handling considerations: adding this bumper changes front-end mass and may alter approach angles and handling slightly; modest suspension or preload adjustments will normally compensate for these small changes during precise crawl operations.

This aluminium front bumper is a practical choice when you want combined protection, lighting and recovery points for TRX-4 and SCX10 II based rigs, while keeping installation and tuning straightforward for trail use.