TRAXXAS TRX4 Precision Adjustable Aluminium F/R Damper Mount TRX4029FR 16pcs by GPM  [TRX4029FR]

Aluminium adjustable damper mount for improved geometry

This 16-piece aluminium adjustable front and rear damper mount set is aimed at TRAXXAS TRX4 owners who require firmer damper support and defined ride-height steps. The machined metal mounts eliminate the flex and deformation seen in original plastic mounts and offer multiple hole positions to tweak damper angle and raise the chassis for better clearance.

Installation is straightforward: place the 3x6x2 aluminium collars between the damper ball ends and the mount, insert the round head screws from the rear and secure them with the 3mm lock nuts on the outside. The small mounting hardware is supplied so the damper bodies do not need modification.

Setup considerations: using the upper holes raises the assembly about 6mm above the factory position, whereas lower hole choices can add around 18mm of lift compared to stock mounting. Any lift will alter suspension geometry and commonly requires tie rod length adjustment to keep axle and steering centred. Because raising the chassis increases the centre of gravity, pairing the mounts with a wider track or wider hex hubs is advised to help maintain lateral stability on steep climbs.

A pragmatic aluminium replacement for TRX4 trail rigs where reliable damper anchoring and controlled lift are required alongside proper geometry and track adjustments.