TRAXXAS UDR 26T Motor Gear Hardened Steel #45 Pinion UDR026TS by GPM  [UDR026TS]

TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS
Price:
£6.58
Brand:
GPM
Model:
UDR026TS
GTIN:
4894538327861
Condition:
Brand New
Write a review
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 26T - 2pc set - GPM UDR026TS"

Replacement 26T pinion for TRAXXAS UDR

This motor pinion is intended for the pinion area on TRAXXAS UNLIMITED DESERT RACER platforms and is supplied as part number UDR026TS. Made from hardened steel #45, the gear improves wear resistance compared with softer alloy alternatives and suits users needing a durable replacement or a tuning swap for motor-to-spur interaction on 4x4 models.

The pinion has 26 teeth while the original spur referenced is 127T, so verify gear mesh and alignment before completing installation. Adjust the motor to the correct motor mount position to secure proper mesh and to protect the motor shaft and bearings from undue loads.

The package contains one Motor Gear and one 4x4 set screw as repair or hop-up items for the pinion area. This component is intended for model RC use to enhance drivetrain durability and predictable handling in normal hobby use.

Is the 4x4 set screw standard size?

Yes, the included 4x4 set screw matches the common pinion fixing used on UDR motor shafts; verify thread fit before final tightening.

Should I change spur gear when fitting this pinion?

Not always, but check tooth count and mesh. If the current spur is heavily worn, replacing both gears gives the best long-term result.

How often should I inspect the pinion?

Inspect the pinion and set screw after intense runs or every few sessions to ensure secure fitment and to spot wear early.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved