TRAXXAS UDR Front Adjustable Turnbuckle Set UDR162SA by GPM  [UDR162SA]

Steering turnbuckle assembly for TRAXXAS UDR

This steering turnbuckle assembly is intended for TRAXXAS UNLIMITED DESERT RACER and is identified by model UDR162SA. It provides adjustable threaded ties with ballend joints to help the steering knuckles complete the intended travel while allowing alignment tweaks.

Materials and function: made from 304 stainless steel for corrosion resistance and rigidity, the turnbuckles allow length adjustment by rotating the body. Ballends are angled to conform with the original knuckle sockets, helping retain correct steering geometry while simplifying toe adjustments.

Included items and fit: supplied as a 6 pcs front steering set for TRAXXAS UNLIMITED DESERT RACER, the contents are 2 stainless steel turnbuckles, 2 stainless steel round head screws 3x20, and 2 stainless steel round head screws 3x16. Use these screws where the original mounting accepts the same sizes.

Installation and tuning notes: fit the turnbuckles between the servo/bellcrank linkage and the steering knuckles; seat the ballends then level initial lengths on left and right. Adjust by rotating the turnbuckle bodies to remove steering trim and set toe; inspect for binding across full lock and re-tighten screws after a few runs.