TRF104 Rear Wing Mount - Graphite 2.0 Factory Pro O-TCPF07 by TAMIYA  [FP-O-TCPF07]

Price:
£7.77
Brand:
Factory Pro
Model:
FP-O-TCPF07
Condition:
Brand New
Write a review

Performance Wing Mount for TRF104

The Factory Pro O-TCPF07 rear wing mount is supplied as an upgrade or replacement for the TAMIYA TRF104 chassis rear wing mounting point. Its graphite 2.0 material offers increased rigidity compared with standard plastic mounts while remaining lightweight for competition use.

Engineered for the TRF104 platform, this mount relies on the chassis original wing post layout and hardware for proper fit. It preserves the stock mounting footprint so standard TRF104 kits generally require no chassis drilling to accept the part.

To install, remove the OEM mount, set the Factory Pro O-TCPF07 into place aligning with the wing posts, and secure using the original fasteners. After fitting, check that the wing sits level and that there is no interference with body panels when the suspension cycles.

From a setup perspective, the stiffer graphite mount limits flex where the wing attaches, helping the aero surface hold its trim under load. That repeatability allows for finer adjustments to rear downforce and balance without the mount shifting.

Is this compatible with other touring car models?

This mount is specified for TRF104 fitment. Other touring cars often use different post spacing, so compatibility is not assured unless the post pattern matches exactly.

Will using graphite change crash repairs?

Graphite adds stiffness which can alter how impact forces are distributed. Inspect the wing and supports after any significant knock and replace parts that show cracking or deformation.

Any tips for setting wing angle after fitting?

Start with your previous settings, then make small incremental changes while testing on track. The improved mount stability will make small trim shifts more effective and easier to assess.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved