TRX4 Track Widening 23mm Aluminium Hex Adapters - TRX4010/23MM by GPM  [TRX4010/23MM]

23mm offset hex adapters for TRX4

This 23mm aluminium hex adapter set is intended for TRAXXAS TRX4 Trail Crawler models and supplied by GPM (TRX4010/23MM). The adapters move the wheel mounting point outward to increase axle track and reduce the gap between the wheel and chassis for a more compact fitment.

Functionally the adapters locate between the wheel hex and hub or driveshaft end, allowing front CVD and rear driveshaft connections to remain while increasing lateral track. The 23mm addition (roughly 18mm more than the reference hex) alters wheel offset and can improve chassis stability when crawling slowly over rough terrain.

Installation is straightforward: remove the wheel hex, fit the adapter onto the hub or CVD stub, then reinstall the wheel and secure the hardware. Made from aluminium to retain stiffness without excessive mass, the adapters are available in several colours to coordinate with the chassis or aid quick identification. This product is designed for RC-scale use only.

Included hardware from the product source: Stainless steel screw shaft M4*2.5*11.8 - 4 pcs, 5mm shims - 4 pcs, 5mm metal washers - 4 pcs, stainless steel hex socket screw 19mm - 4 pcs.