The kit contains four 1.0 inch adhesive crawler tyres designed for TRX4M scale vehicles. Produced from butyl rubber in a super-soft compound, each tyre includes a standard foam insert and internal reinforcement aimed at resisting tears and maintaining sidewall support during crawling. The specified size is 56mm outer diameter by 19.5mm width to suit 1.0 inch wheel fittings on the referenced TRAXXAS 1/18 chassis.
Design details emphasise a tight inner diameter and a long clamping tongue to cut down slippage on bead-style wheels. A longer fixing screw combined with a narrow clamp thickness allows direct securing to compatible bead wheels. The supplied foam insert helps stabilise the tread at low speeds, and the reinforced carcass is intended to give improved service life over thin plastic tyres.
Setup advice: experiment with foam firmness to find the right compromise between sidewall support and grip; firmer inserts improve obstacle clearance while softer inserts increase ground contact on rough tracks. Maintain the adhesive seal and check for nicks after use, replacing inserts if they compress or lose shape.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved
