X4'24 Graphite Main Chassis Plate 2.25 for XRAY - O-XCP019 by Factory Pro  [FP-O-XCP019]

Main chassis plate for XRAY X4'24 cars

The Factory Pro O-XCP019 main chassis is supplied as an aftermarket graphite 2.25 plate for the XRAY X4'24 touring car. This single replacement plate is designed for hobbyists conducting chassis swaps or experimenting with baseline stiffness rather than for full vehicle assembly.

Fitment is specific to the X4'24 model range as shown in the product name. Replacing this plate will change the chassis backbone and therefore influence ride height, torsional behaviour and the way suspension and steering inputs are transmitted, so plan supporting setup work on shocks and anti-roll settings after the swap.

Fitting notes: ensure the plate lines up with existing bulkheads and motor mount, check for clearance around electronics and driveline parts, and apply manufacturer torque specs and thread-lock where appropriate. Any required screws or spacers are not automatically included unless the seller lists them.

Use this Factory Pro plate when replacing a damaged chassis or when tuning stiffness on XRAY X4'24 cars, and carry out methodical suspension checks to assess handling changes.