XRAY 338524 24T Pinion Gear Hardcoated 7075 T6  [XR-338524]

XRAY 338524 XCA Aluminum 7075 T6 Hardcoated Pinion Gear - 24T (2nd)
Price:
£16.95
Brand:
XRAY
Model:
XR-338524
Condition:
Brand New
Write a review
alt="XRAY 338524 XCA Aluminum 7075 T6 Hardcoated Pinion Gear - 24T (2nd)" title="XRAY 338524 XCA Aluminum 7075 T6 Hardcoated Pinion Gear - 24T (2nd)"
alt="XRAY 338524 XCA Aluminum 7075 T6 Hardcoated Pinion Gear - 24T (2nd)" title="XRAY 338524 XCA Aluminum 7075 T6 Hardcoated Pinion Gear - 24T (2nd)"
alt="XRAY 338524 XCA Aluminum 7075 T6 Hardcoated Pinion Gear - 24T (2nd)" title="XRAY 338524 XCA Aluminum 7075 T6 Hardcoated Pinion Gear - 24T (2nd)"

24T Hardcoated Pinion Tailored for XRAY NT1

This XRAY 338524 24T pinion is fabricated from 7075 T6 aluminium and finished with a hardcoat to resist wear while keeping mass low on the XRAY NT1. It suits drivers who change ratios frequently.

Engineered Tooth Geometry for Cleaner Meshing

Precision machining creates a consistent tooth profile to lower backlash and reduce drivetrain vibration, improving throttle response through corners and straights.

Easy Installation and Clear Tooth Labelling

Internal fine threads match XCA clutchbells and the stamped tooth count makes identification fast, helping you optimise gear ratios between sessions without delay.

Specifications

  • Material: 7075 T6 Aluminum
  • Tooth Count: 24T
  • Compatibility: XRAY NT1
  • Finish: Hardcoated

A dependable choice for racers and dedicated hobbyists looking to refine the XRAY NT1 drivetrain with a tough, lightweight pinion.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do I need different screws for this pinion?

No special screws are required provided you use the correct clutchbell mounting screws and torque them to prevent movement under load.

How should I check for correct mesh after fitting?

Set a small clearance using the paper method, rotate the motor by hand to confirm free movement, then run a short test to verify temperatures and noise levels.

Can this pinion be used indoors and outdoors?

Yes, it works on both indoor carpet and outdoor asphalt surfaces; just avoid sand and heavy grit which can accelerate wear on the hardcoat.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved