XRAY 350200 XT8 1/8 Nitro Truggy Elite Kit  [XR-350200]

XRAY 350200 XT8
Price:
£0.00
Brand:
XRAY
Model:
XR-350200
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"
alt="XRAY 350200 XT8" title="XRAY 350200 XT8"

XRAY 350200 XT8 Racing Profile

The XRAY 350200 XT8 is a race-ready 1/8 nitro truggy developed by Dipl. Eng. Hudy Juraj with input from championship experience. It offers a platform focused on precise handling and the adjustability needed for top level events.

Purposeful Race Geometry

The vehicle layout focuses on repeatable handling and controllable traction. A tailored gear ratio and low center of gravity make the XT8 predictable on landings and stable through technical sections, giving drivers confidence to push harder.

High Grade Chassis Craftsmanship

Manufactured from Swiss 7075 T6 aluminum, the chassis is CNC-machined for ideal stiffness and minimal mass. Countersunk screw holes create a flat underside and composite protectors safeguard internal components from impacts and debris.

Fine Adjustable Suspension and Durable Drive

XRAY I.S.S. and I.A.C. let you precisely change roll behavior and caster for different track surfaces. The drivetrain uses Hudy Spring Steel for longevity, and 22 rubber-sealed bearings reduce friction for consistent lap times.

Specifications

  • Scale: 1/8
  • Chassis: CNC-machined Swiss 7075 T6 aluminum
  • Drive Type: Full-time shaft-drive 4WD
  • Suspension: Fully adjustable with I.S.S. and I.A.C. technology
  • Shock Type: Big-bore, extra-long oil-filled coil-over
  • Tires: XRAY Thrax low-profile truggy tires
  • Fuel Tank Capacity: 150cc

The XRAY 350200 XT8 suits competitive drivers seeking a finely engineered truggy platform with race proven components and extensive setup options.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What setup changes help with understeer?

To reduce understeer try increasing front roll stiffness, reduce rear toe-in or add front traction via tyre compound. Small changes to I.S.S. and caster can also shift balance toward the front.

How do I protect bearings from water and dust?

Use rubber-sealed bearings and apply light bearing oil after cleaning. Fit guards where possible and avoid running through deep puddles to extend bearing life.

Which shock oil weight should I start with?

Start with medium-weight oil and adjust based on track bumpiness and desired rebound. Heavier oil slows rebound for rough surfaces, lighter oil quickens response for smooth tracks.

What routine checks before a race day?

Check screws and fasteners, inspect drivetrain and bearings, verify fuel lines and tank seals, and confirm radio and servo operation. A quick run through setup items prevents unwanted failures at the track.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved