XRAY 355713 13T Steel Pinion Gear - Precision Fit  [XR-355713]

XRAY 355713 Steel Pinion Gear 13T
Price:
£23.85
Brand:
XRAY
Model:
XR-355713
Condition:
Brand New
Write a review

Precision 13-Tooth Pinion from XRAY

The XRAY 355713 Steel Pinion Gear provides a precision 13-tooth option for 1/10 scale RC cars. Manufactured from hardened steel, it is intended to give consistent engagement and withstand routine running and racing demands.

Machined Teeth and Controlled Run-In

Each tooth on the XRAY 355713 is machined with attention to profile and edge chamfering to lower friction and extend spur gear life. The production run-in process aids concentricity so the gear spins true under load.

Secure Installation with Supplied Screw

Fitting is simple thanks to the supplied M4x4 set screw that secures the pinion to most standard 1/10 motor shafts. Use the correct mesh setting and check retention after the first short session.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this pinion work with my spur gear brand?

In most cases yes, provided the spur gear has compatible tooth profile and spacing. Verify tooth pitch and mesh before extended use.

What signs show the pinion needs replacing?

Look for rounded or chipped teeth, increased gear noise, or slipping under load. Any of these indicate it is time to replace the pinion.

Can I run this with a high torque setup?

The steel construction helps with higher torque, but ensure the rest of your drivetrain is rated for the loads you intend to apply to avoid cascading failures.

Is any bedding in needed after installation?

A short low-speed run followed by a mesh recheck is recommended to settle the gear and confirm the set screw remains tight.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved