XRAY 364011 Vintage XB Series Aluminium Motor Bulkhead - Precision Fit  [XR-364011]

XRAY 364011 Aluminum Motor Bulkhead
Price:
£45.97
Brand:
XRAY
Model:
XR-364011
Condition:
Brand New
Write a review

Precision Aluminium Motor Bulkhead for XRAY Vintage XB

The XRAY 364011 Aluminium Motor Bulkhead is manufactured from Swiss 7075 T6 aluminium to provide a strong, accurate motor mounting solution for vintage XRAY XB chassis. It accepts both brushed and brushless motors so you can tailor your electronics to the event or track.

Reversible motor orientation and eccentric mounting

The bulkhead design allows motor rotation from right-to-left, enabling forward or rearward installation. The motor is secured to an eccentric mounting plate that locates into a built-in holder supporting the drivetrain, simplifying gear mesh setup and locking with a single screw.

Bayonet retention for reliable service

A bayonet-style fastening stops the motor plate from loosening under hard use or impacts. When servicing is required, reverse the plate rotation to release the motor quickly and re-fit it just as easily.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this fit my older XB chassis?

This component is intended for the vintage XRAY XB family. Check measurements against your existing motor mount points to ensure match before fitting.

What does the eccentric plate let me do?

The eccentric plate lets you micro adjust the motor position to achieve the correct pinion to spur mesh without shims, then the clamp screw secures that position.

How does the bayonet mount work during hard running?

The bayonet engagement locks the plate to the holder, greatly reducing the chance of the motor working loose during high loads or impacts.

Any setup recommendations?

Set the mesh with a test run at low speed, tighten the clamp, then recheck after a short session. Keep the bayonet area clean and inspect after heavy use.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved