XRAY NT1 Pinion 23-Tooth 2nd Gear Upgrade - Arrowmax AM-NT1-338523  [AM-NT1-338523]

Arrowmax AM-NT1-338523 2nd. Gear 23T (7075 HARD)
Price:
£4.50
Brand:
Arrowmax
Model:
AM-NT1-338523
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

NT1 23-Tooth 2nd Gear Pinion

The 23T 2nd gear pinion is an Arrowmax aftermarket unit for the XRAY NT1 platform, listed as AM-NT1-338523. Manufactured from 7075-T6 aluminium and finished with a hard coating, this pinion is aimed at maintaining reliable mesh with NT1 spur gears while keeping rotational inertia low for consistent driveline response.

Performance notes: fit this pinion to alter the final drive ratio or to match a chosen motor pinion as part of setup. It engages with the NT1 gearbox train, so confirm correct mesh and endplay on installation and monitor run-in friction before pushing the car hard.

Fitment tips: use the NT1s standard clutch/pinion mounting arrangement, tighten by hand to seat then relax slightly for proper engagement, and check that the coated surface clears the spur gear without binding. The Arrowmax family includes multiple tooth counts to let you tune acceleration versus top speed while staying within NT1 drivetrain tolerances.

Is this pinion race legal for touring classes?

Legality depends on your race class rules; the pinion is a direct-fit NT1 series part, so check event regulations on aftermarket gears before racing.

How should I check mesh after fitting?

Set a neutral mesh using the clutch/pinion mount, rotate the drivetrain by hand to confirm smooth engagement, and inspect for any rubbing or tight spots during initial runs.

Does Arrowmax offer different tooth counts in this range?

Yes, the same Arrowmax design is available in multiple tooth counts so you can alter gear ratios; always check compatibility with your NT1 spur before changing counts.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved