XRAY T4 Front Upper Holder Graphite - AM-T4-301218 by Arrowmax  [AM-T4-301218]

Arrowmax AM-T4-301218 T4 Upper Holder For Bumper Graphite
Price:
£12.08
Brand:
Arrowmax
Model:
AM-T4-301218
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

T4 Graphite Upper Mount for Front Bumper

The Arrowmax upper holder is a graphite bumper mount intended for the XRAY T4 chassis range. It provides the mounting interface for the front bumper and aids in setting front-end stiffness for track tuning.

As a replacement or optional upgrade, this component channels front-end setup changes to affect steering response and dynamic weight transfer. Graphite offers a good compromise between rigidity and low weight, helping fine-tune handling without significant mass increase.

Fitting is straightforward for experienced modellers: remove the current holder, align the graphite piece with the original posts, and secure with the factory fasteners. Adjust clamp positions and screw torque gradually to observe handling effects and avoid overtightening which can stress graphite parts.

Specifications

  • Item: Upper holder for front bumper
  • Material: Graphite
  • Model Number: AM-T4-301218
  • Compatibility: XRAY T4

Fit this Arrowmax graphite upper holder when you need a direct T4 replacement or a lightweight upgrade to refine front-end stiffness for circuit use.

Will this affect front-end balance a lot?

It provides a measurable increase in front stiffness which can change balance and turn-in feel, but effects are moderate and best used alongside complementary setup changes.

Is the part suitable for club racing?

Yes, its lightweight and stiff properties make it suitable for track use including club racing where fine tuning of front response matters.

How do I avoid damaging the graphite during fitting?

Handle the part gently, align holes before inserting screws, and tighten bolts slowly. Using a torque-limited driver or stopping early reduces risk of creating stress points.

Does Arrowmax AM-T4-301218 replace the OEM holder directly?

Yes, it is intended as a direct-fit option for the XRAY T4 upper bumper mount and aligns with the original mounting interfaces.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved