XRAY X4F'25 Front Upper Deck Graphite 2.0 Compatible Upgrade - Factory Pro O-XCP022  [FP-O-XCP022]

Price:
£7.77
Brand:
Factory Pro
Model:
FP-O-XCP022
Condition:
Brand New
Write a review

Overview of the front upper deck

The Factory Pro O-XCP022 front upper deck is an aftermarket graphite plate designed to fit the XRAY X4F'25 front upper section. The 2.0mm graphite construction targets front stiffness control for hobbyists and racers working on precise handling adjustments.

Installation should be done with care to match the deck to the X4F'25 factory mounting points, ensuring screws align and the plate sits flat without impeding suspension movement. After fitting, double-check clearance around the servo and steering linkages and confirm nothing binds through the steering travel. The part is intended to replace the stock upper deck to alter front chassis dynamics.

Practical tuning tip: moving to a graphite front deck will typically increase stiffness at the front and can give a snappier turn-in and different steering feedback. Tweak suspension and tyre settings in small steps and use timed runs to judge the net effect.

Is the Factory Pro O-XCP022 compatible with stock X4F'25 parts?

Yes, it is intended as a direct replacement for the XRAY X4F'25 front upper deck, but always verify chassis revision and test fit before final assembly.

Will this deck work on carpet and asphalt tracks?

Graphite increases front stiffness regardless of surface; on high-grip surfaces it can improve turn-in, while on low-grip layouts you may need softer damping or different tyre choices to balance handling.

How do I judge whether the deck is the right upgrade for my setup?

Compare lap consistency and steering response before and after the swap, make one setup change at a time, and note tyre wear and steering feel to decide if the graphite deck suits your driving style.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved