XRAY X4F'25 Upper Deck Rear Graphite 2.0 - Factory Pro O-XCP023 Performance Plate  [FP-O-XCP023]

Price:
£9.98
Brand:
Factory Pro
Model:
FP-O-XCP023
Condition:
Brand New
Write a review

Upper rear deck compatible with XRAY X4F'25

This Factory Pro O-XCP023 upper deck is an RC-grade graphite 2.0 rear plate made for the XRAY X4F'25 chassis. It replaces the standard rear deck to influence rear stiffness and help refine the car's balance as part of setup tuning.

As a tuning component, the graphite 2.0 plate alters rear response to weight transfer and lateral loads; racers commonly fit it to reduce rear flex and improve traction consistency on medium to high grip asphalt. Proper fitment depends on matching bulkhead mount points and screw holes, so confirm alignment and drivetrain clearance before final torqueing.

Fitting notes: remove the OEM deck, retain or upgrade fasteners as appropriate, check screw lengths to avoid interference with moving parts, and tighten bolts progressively and evenly to preserve chassis flatness. After fitting, check wheel toe and droop to ensure the suspension operates freely.

Can this deck be used on non X4F'25 cars?

The deck is intended for the XRAY X4F'25. For other chassis, measure hole centres and bulkhead positions to verify whether the O-XCP023 will fit without modification.

What setup gains are typical after fitting?

Typical gains include reduced rear compliance and improved mid-corner stability, which can lead to more consistent lap times on grippy asphalt when combined with complementary suspension tuning.

How do I avoid introducing binding?

Ensure screws do not bottom out or press on suspension linkages, tighten in small, even increments, and recheck suspension droop and steering movement after installation.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved