Yokomo B7-SS10A Aluminium Suspension Spacer 1.0mm for BD7  [B7-SS10A]

Yokomo B7-SS10A 1.0mm Aluminum Sus-mount spacer for BD7
Price:
£11.06
Brand:
Yokomo
Model:
B7-SS10A
GTIN:
0639342204052
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD7 category
Write a review

Precise Tuning with Yokomo B7-SS10A Spacer

Refine your BD7 setup using the Yokomo B7-SS10A 1.0mm aluminium suspension spacer. It permits ride-height adjustments without taking off the suspension mounts, so fine tuning is faster and less fiddly.

How the Spacer Works

The B7-SS10A is supplied in two integrated variants for FF and RR positions and four standalone pieces for FR and RF corners. This selection allows you to lift mount points quickly and repeatably, helping with lap time focused setup work.

Compatibility Details

Suitable Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
  • MRTC-BD11-1
  • MSR-BD11
  • MRTC-BD11US
  • MRTC-BD11A-1
  • MSR-010FE
  • MSR-010FEA
  • MSR-BD12
  • MSR-BD12A
  • MSR-BDFWD
  • MDR-020
  • MDR-020BL
  • MDR-020P
  • MDR-020R
  • MRTC-BD715B
  • MRTC-BD715O
  • MRTC-BD715S
  • MRTC-BD716
  • MRTC-BD716H
  • MRTC-BD716O
  • MRTC-BD716S
  • MRTC-BD7RS3S
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will fitting the spacer change my shock length?

Adding a 1.0mm spacer raises the mount relative to the chassis and can alter shock preload slightly; check shock length and preload after fitting to maintain balance.

Are there recommended corners to try first?

Many drivers start with front spacers to influence turn-in, then try rear spacers if the car understeers or oversteers, testing one change at a time.

Can I use the spacer on other brands?

The spacer is made for BD7-style mounts; it may fit similar mount patterns but confirm dimensions before using on non-listed chassis.

How durable is the aluminium under racing conditions?

Aluminium spacers are robust for setup use, but inspect for deformation after heavy impacts and replace if the seating faces are damaged.

Should I re-tighten mount screws after driving?

Check and torque mount screws after a few laps to ensure nothing has worked loose and that the spacer remains properly seated.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved