Yokomo B8-RTC-02 Rear Toe Control Arm 54mm 40.5mm  [B8-RTC-02]

Yokomo B8-RTC-02 54mmxShock40.5mm RTC Sus-Arm for BD-8
Price:
£3.81
Brand:
Yokomo
Model:
B8-RTC-02
GTIN:
3888
Condition:
Brand New
Write a review

About the Yokomo B8-RTC-02 Suspension Arm

The Yokomo B8-RTC-02 is designed to allow installation of the RTC rear toe system on BD8 and BD7 2016 chassis. Constructed in graphite resin, the arm aims to provide a firm feel while keeping mass low for responsive handling.

Geometry and Important Specs

Specifically matched to the BD8 series, the arm has a 54mm spacing between inner and outer suspension pins to retain correct geometry. The inner pin to shock mount is set at 40.5mm to assist with consistent shock leverage and roll characteristics.

Supported Chassis Models

  • MRTC-BD8-P
  • MRTC-BD8AP
  • MRTC-BD8
  • MRTC-BD8A
  • MRTC-BD8SV
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can this arm be used for touring on tarmac tracks?

Yes, the arm is intended for on-road BD8 touring applications and retains standard geometry, making it suitable for tarmac circuits when set up correctly.

How should I adjust toe after fitting?

Begin with factory toe settings and then make incremental changes while checking tyre wear and lap times; the RTC system provides finer rear toe control so small adjustments have noticeable effects.

Are aftermarket shocks compatible with the 40.5mm mount?

Most shocks designed for BD8 fit the 40.5mm inner pin to shock distance, but confirm eyelet spacing before installation to ensure correct mounting and travel.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved