Yokomo B9-00219LA Graphite Main Chassis for BD9 (Fits BD10 2mm Long Suspension Arm)  [B9-00219LA]

Yokomo B9-00219LA Graphite main chassis for BD9 (2mm Long susarm)
Price:
£55.66
Brand:
Yokomo
Model:
B9-00219LA
GTIN:
0639342181902
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD919S category
Write a review

Fitment and functional overview

This graphite main chassis serves as the mounting base to attach a BD10 standard 2mm long suspension arm to BD9 vehicles. It secures the suspension arm and helps preserve the alignment between the front and rear suspension systems.

Compatibility is focused on BD9 installations and the component is listed for the MRTC-BD919S chassis. The graphite construction offers the stiffness and damping characteristics tuners use to influence handling balance without altering electronics.

Installation notes: the chassis replaces the original BD9 main plate when a BD10 2mm long suspension arm is being fitted. Standard mounting points are maintained for a bolt-on installation; typical steps are removing the stock plate, fitting this graphite chassis, and confirming clearances for steering linkages and suspension travel. No additional mounting hardware is specified, so use the original fasteners or OEM-recommended replacements.

Specifications

  • Item Graphite main chassis
  • Material Graphite
  • Model Number B9-00219LA
  • Compatibility BD9, MRTC-BD919S
  • Notes For mounting BD10 standard 2mm long suspension arm

For builders intending to fit a BD10-standard 2mm long suspension arm onto a BD9-based car, this graphite main chassis supplies the precision mounting surface and stiffness needed for consistent setup work.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can this plate be used across different BD9 variants?

It is intended for BD9 platforms listed in the compatibility notes; confirm the exact BD9 variant and chassis revision before purchase to ensure correct fit.

Will electronics or servos need relocation after fitting?

In most installs the original component layout is retained, but always verify that electronics, servo arms, and wiring clear the new chassis through full suspension travel.

Are any trim or shims recommended for precise alignment?

Minor shimming or alignment checks may be useful to achieve ideal steering geometry after installation; use measured adjustments rather than guessing to dial in the setup.

What are the key post-fit checks I should perform?

After fitting, check steering travel, suspension arm sweep, and that the chassis does not contact any electronics or wiring under full suspension movement; address any interference before use.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved