Yokomo B9-SLF280A - BD9 Linear Front Shock Spring 2.80 Precision Tuning Spring  [B9-SLF280A]

Yokomo B9-SLF280A Front linier shock spring (2.80) for BD9
Price:
£8.66
Brand:
Yokomo
Model:
B9-SLF280A
GTIN:
0639342204854
Condition:
Brand New
Write a review

Improve BD9 Cornering with Yokomo Linear Springs

The Yokomo B9-SLF280A linear front shock spring is tailored for BD9 chassis work to enhance steering accuracy and response. Manufactured in cooperation with AXON, the even-pitch winding promotes a more aggressive handling characteristic compared to progressive types. It is aimed at drivers who want clearer front-end feedback and reduced understeer while refining setup.

Stable Linear Rate for Predictable Handling

The straight linear construction of the Yokomo B9-SLF280A produces consistent behaviour throughout compression instead of a progressive ramp. This spring is 1.5mm shorter than previous versions, which helps avoid changing shock end fittings when adjusting ride height. Based on tyre profile and track surface the spring can be employed on either the front or rear during setup trials.

Suitable Models

  • MRTC-BD11-1
  • MSR-BD11
  • MRTC-BD11A-1
  • MRTC-BD11US
  • MSR-010FE
  • MSR-010FEA
  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
  • MSR-BD12
  • MSR-BD12A
  • MSR-BDFWD
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will switching to these springs change lap time?

Potentially yes, by improving turn-in and mid-corner stability you may see more consistent laps but actual time gains depend on setup and driver input.

Are these springs compatible with aftermarket shock parts?

They are compatible with most standard BD9-compatible shock assemblies; verify shaft length and spring perch spacing when using non-standard hardware.

How should I change damping after fitting?

Adjust damper oil or piston choice to suit the firmer linear rate, reducing oscillation and matching rebound to the new spring behaviour.

Can I use these springs on carpet and asphalt?

Yes, the linear spring is versatile; fine tune damping and preload to suit carpet or asphalt surfaces for best handling balance.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved