Yokomo BD9 Touring Mid Chassis 7075 2.0mm AM-910019 by Arrowmax  [AM-910019]

Arrowmax AM-910019 AM Medius Yokomo BD9 MID Chassis Aium 7075 2.0mm
Price:
£67.35
Brand:
Arrowmax
Model:
AM-910019
Condition:
Brand New
Write a review

Mid chassis plate for BD9 handling tweaks

The Arrowmax AM-910019 mid chassis is an aftermarket replacement tailored for the Yokomo BD9 touring car. It is intended to alter chassis rigidity to influence handling balance and mid-corner behaviour when tuning on the track.

The component is intended to work within the BD9 chassis architecture and to be used alongside standard BD9 mounting points and hardware. When replacing the original plate, check alignment of motor mount, battery location, and suspension pickup points to maintain intended geometry.

Specifications

  • Item: MID chassis plate
  • Material: Aium 7075
  • Model Number: AM-910019
  • Thickness: 2.0mm
  • Compatibility: Yokomo BD9

Fit this mid plate to refine flex and handling characteristics; always inspect clearances and recheck your setup with a short run after installation.

Will this alter the BD9 chassis geometry?

The plate matches BD9 geometry, but you should verify motor mount and battery position after fitting to ensure the original geometry remains unchanged.

How should I assess handling changes?

Compare lap times and driver feel before and after fitting; small incremental setup changes help isolate the plate's effect on handling.

Is any special maintenance required?

Inspect for loose screws, check for wear at mount points, and confirm fastener torque periodically to maintain consistent behaviour.

Will this work with aftermarket motor mounts?

It should be compatible with most BD9-style motor mounts, but validate clearance and alignment when using non-standard components.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved