Yokomo D-049 FCD Gear Set 17T/27T (Rear x1.5)  [D-049]

Yokomo D-049 FCD Gear Set 17T/27T (Rear x1.5)
Price:
£6.56
Brand:
Yokomo
Model:
D-049
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-DPRA category
Write a review

Summary: D-049 FCD 1.5x rear gear

This item is a replacement rear gear set for the 1.5x FCD (Full Counter Drift) rear assembly used in scale RC drift models. It is supplied to replace worn or damaged rear gears and supports maintenance of drift-focused drivetrains where the FCD ratio is required.

The set represents the rear component of the FCD 1.5x layout and is specified with 17T and 27T tooth counts. It is sold as an individual spare made to match the original FCD gear geometry so drivetrain timing and mesh remain aligned with the FCD configuration.

When fitting this gear, ensure correct mesh and minimal backlash: verify pinion alignment, apply any recommended shims, and confirm spur concentricity before final assembly to preserve the FCD counter-drift handling.

Compatible Models

  • DP-DP7C
  • DP-DP8
  • DP-DPMS
  • DP-DPRA
  • DP-DPRH
  • DP-YD4
  • DP-YD4MR
  • DP-GR35
  • DP-UF86A
  • DP-M786A
  • DP-HKS86A
  • DP-MKXA
  • DP-C33A
  • DP-SC430A
  • DP-TY180A
  • DP-JZX2A
  • DP-BNAA
  • DP-SDA
  • DP-TSFCA
  • DP-EVXA
  • DP-DKPA
  • DP-BS15A
  • DP-REA7A
  • DP-C35A
  • DP-DM13A
  • DP-GDBFA
  • DP-ZCRA
  • DP-1093A
  • DP-TYS15A
  • DP-BL34DA
  • DP-B324RA
  • DP-SR86A
  • DP-PS13A
  • DP-TRS15A
  • DP-JZZ30A
  • DP-DR86A
  • DP-REAA
  • DP-ORCZ33A
  • DP-GDBA
  • DP-JZXA
  • DP-KOS15A
  • DP-IS220A
  • DP-TSS15A
  • DP-BLR34A
  • DP-APEXA
  • DP-HKSA
  • DP-180SXA
  • DP-FC3SA
  • DP-S15A
  • DP-AE86A
  • DP-DRG3
  • DP-DRG3G
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this an exact match for the original rear FCD gear?

Yes. The part is intended as a direct spare that reproduces the original FCD rear geometry for the 1.5x arrangement so it fits without altering the designed gear mesh.

Do I need to adjust shims after installation?

Possibly. After fitting, check mesh and endplay; add or remove thin shims as required to eliminate excessive backlash while avoiding binding.

Will this retain the FCD handling characteristics?

When installed correctly within the FCD 1.5x layout, the gear maintains the intended counter-drift behaviour; correct assembly is essential to preserve handling traits.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved