Yokomo D-090 FCD Gear set 17t/22t (x1.8 Rear) Rear Gear for DP-Series  [D-090]

Yokomo D-090 FCD Gear set 17t/22t (x1.8 Rear)
Price:
£6.56
Brand:
Yokomo
Model:
D-090
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-DPRA category
Write a review

1.8x FCD rear gear — product summary

This is an RC-scale spare gear set designed for the 1.8x FCD (full counter drift) rear gear configuration used on Yokomo drift platforms. It serves as a direct replacement to bring the rear gearing back to the specified 1.8x ratio without altering other drivetrain geometry.

Fit this gear to replace worn teeth, recover from gear damage, or return a vehicle to its factory 1.8x FCD rear arrangement. Installation is done inside the rear gearbox; always perform standard gear-mesh and runout checks to avoid premature failure.

Service notes: check and maintain correct mesh clearance between motor pinion and spur, inspect surrounding bearings for any play, and verify alignment under light load before completing assembly. This component is intended solely for model use.

Compatibility

  • DP-DP7C
  • DP-DP8
  • DP-DPMS
  • DP-DPRA
  • DP-DPRH
  • DP-YD4
  • DP-YD4MR
  • DP-GR35
  • DP-UF86A
  • DP-M786A
  • DP-HKS86A
  • DP-MKXA
  • DP-C33A
  • DP-SC430A
  • DP-TY180A
  • DP-JZX2A
  • DP-BNAA
  • DP-SDA
  • DP-TSFCA
  • DP-EVXA
  • DP-DKPA
  • DP-BS15A
  • DP-REA7A
  • DP-C35A
  • DP-DM13A
  • DP-GDBFA
  • DP-ZCRA
  • DP-1093A
  • DP-TYS15A
  • DP-BL34DA
  • DP-B324RA
  • DP-SR86A
  • DP-PS13A
  • DP-TRS15A
  • DP-JZZ30A
  • DP-DR86A
  • DP-REAA
  • DP-ORCZ33A
  • DP-GDBA
  • DP-JZXA
  • DP-KOS15A
  • DP-IS220A
  • DP-TSS15A
  • DP-BLR34A
  • DP-APEXA
  • DP-HKSA
  • DP-180SXA
  • DP-FC3SA
  • DP-S15A
  • DP-AE86A
  • DP-DRG3
  • DP-DRG3G
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do all listed DP-series chassis accept this gear without modification?

Yes, the chassis codes shown in the compatibility list correspond to the DP-series models designed to accept this D-090 gear as a direct replacement. Confirm the model code before ordering.

What post-install checks help maximise gear life?

After fitting, set and verify correct gear mesh, inspect bearings for smooth operation, and run the drivetrain lightly to ensure there is no binding or unusual noise before full use.

Should bearings be replaced when fitting a new gear?

Inspect nearby bearings for wear during replacement. Replace any bearing that shows play or roughness to protect the new gear and ensure reliable performance.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved