Yokomo RP-022 M2 Rotor Replacement for Racing Performer  [RP-022]

Yokomo RP-022 Racing Performer Rotor #22 M2 D12.5xd7.25x25.3
Price:
£24.78
Brand:
Yokomo
Model:
RP-022
GTIN:
11
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Rotor replacement details for Racing Performer M2

This replacement rotor is designed as a direct spare for the Racing Performer M2 series, supplied under Yokomo model RP-022. It is an RC-scale rotor intended to replace a worn or damaged rotor in compatible Racing Performer M2 motors, using the magnet dimensions provided to match internal clearances and stacking length.

Key measured attributes from the original unit are provided so builders can verify fit before installation. The rotor's magnet outer diameter is 12.5mm, inner diameter 7.25mm, and the magnet length is 25.3mm, which define the rotor's axial length and radial fit inside the motor can. Keep the part as a dedicated RC component and confirm bearing and shaft interfaces on your motor before fitting.

In tuning terms the rotor is a consumable wear item and a replacement rotor restores the original internal geometry of the motor assembly. When replacing, inspect the rotor for balance and freedom on the shaft, clean mating surfaces, and ensure correct seating to avoid rubbing or electrical contact with stationary components.

Specifications

  • Item: Rotor
  • Material: Magnet
  • Model Number: RP-022
  • Compatibility: Racing Performer M2 series
  • Dimensions: OD 12.5mm, ID 7.25mm, Length 25.3mm

Use this rotor when replacing a worn Racing Performer M2 rotor to restore the motor's original internal geometry and maintain consistent RC performance.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is RP-022 compatible with my variant of the M2 series?

RP-022 is specified for the Racing Performer M2 series; confirm your motor's internal clearances against the listed OD 12.5mm, ID 7.25mm and length 25.3mm to ensure compatibility.

Where can I source replacement bearings if needed?

Bearings are not included with the rotor; source correct-size motor bearings from RC suppliers and match bore and outer dimensions to your motor case.

Will fitting a used rotor cause issues?

Used rotors can carry wear or magnet degradation; inspect for scoring, balance and secure magnet seating before reuse to avoid vibration or reduced performance.

Can I mix and match rotors between M2 motors?

Mixing rotors is acceptable if dimensions and shaft interfaces match; always check OD, ID and length to prevent mechanical interference or electrical contact.

How to verify the rotor before final assembly?

Measure the rotor dimensions, test fit on the shaft without bearings to confirm clearance, then perform a slow spin check for true running prior to sealing the motor can.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved