Yokomo SG-64108 64-Pitch 108T Precision Spur Gear  [SG-64108]

Price:
£2.46
Brand:
Yokomo
Model:
SG-64108
GTIN:
11
Condition:
Brand New
Write a review

Reliable 108T Spur for 64-Pitch Gearing

The Yokomo SG-64108 Precision Spur Gear is built for accurate meshing in 64-pitch RC drivetrains. With its 108-tooth profile, it aims to keep power flow smooth through the gearbox.

Suitable Applications

Fit this spur to models specified for 64-pitch gear sets and always match it to an equivalent pitch pinion. It is useful for those tweaking gear ratios for track work or park sessions where consistent engagement counts.

Best Practice for Setup

Adjust the gear mesh to a minimal but free engagement and remove debris regularly. Correct alignment and occasional light lubrication will help preserve tooth shape and reduce wear over time.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this gear fit older 64-pitch models?

If the original specification calls for 64-pitch gears and the spline/shaft dimensions match, the SG-64108 should be compatible. Always verify shaft diameter and spline fit.

How should I check gear mesh correctly?

Use a strip of paper between pinion and spur, tighten the mesh, then remove the paper to leave a small clearance. Run a low-power test to confirm no binding.

Is lubrication necessary on the mesh?

Light lubrication can reduce wear and noise, but avoid heavy grease that attracts dirt. A small amount of suitable gear lubricant or oil is usually enough.

What common issues should I watch for?

Watch for chipped or rounded teeth after impacts, increasing backlash or persistent noise; these indicate the spur or related drivetrain parts may need attention.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved