Yokomo Y2-002SGA Graphite Main Chassis for YD-2S PLUS/SX  [Y2-002SGA]

Yokomo Y2-002SGA Graphite Main Chassis for YD-2S PLUS/SX
Price:
£72.56
Brand:
Yokomo
Model:
Y2-002SGA
GTIN:
0639342190454
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YD-2 category
Write a review

YD-2S graphite main plate overview

The Yokomo Y2-002SGA is a graphite main chassis plate intended for YD-2S models, supplied in a matte graphite finish at approximately 2.5 mm thickness. As a replacement main board it is lighter than many plastic alternatives and provides a firmer baseline for drivers seeking more consistent mid-corner behaviour.

Fitment retains the YD-2S original mounting footprint so the plate typically installs with the existing chassis hardware on compatible variants. To fit the board, remove the original chassis and transfer mounts and electronics; always double-check clearances around the servo, ESC and motor before final assembly to prevent unexpected contact due to the different material profile.

In use, a graphite chassis changes the car's central flex and can improve stability during direction changes. Competent tuners combine a stiffer main plate with suspension geometry and tyre choices to tune rotation and grip for their driving style.

Specification details

  • Item: Graphite main chassis
  • Material: Matte graphite, approx 2.5 mm thickness
  • Model Number: Y2-002SGA
  • Compatibility: DP-YD2S-PL, DP-YD2SX, DP-YD2SX2, DP-YD2SX2R, DP-YD2SX2P, DP-YD2S, DP-YD2SG, DP-YD2SS, DP-YD2SAC

Compatibility

  • DP-YD2S-PL
  • DP-YD2SX
  • DP-YD2SX2
  • DP-YD2SX2R
  • DP-YD2SX2P
  • DP-YD2S
  • DP-YD2SG
  • DP-YD2SS
  • DP-YD2SAC

The Y2-002SGA is a practical graphite replacement for YD-2S variants when you want improved mid-corner stability and a more predictable steering platform without modifying the standard mounting layout.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this plate accept all YD-2S accessories and mounts?

Yes, the plate follows the YD-2S mounting layout and is designed to work with the standard accessory and mount locations used on the listed compatible models.

Are there any clearance checks I should perform?

Check servo travel, ESC and motor clearance during trial fit. Because graphite can differ slightly in profile from the original material, confirm there is no unintended contact before completing the installation.

How precise is the stated thickness?

The thickness is given as approximately 2.5 mm; manufacturing tolerances can cause minor variation but this is normally within acceptable limits for fit and function.

Does fitting this plate change recommended maintenance?

Inspect mounting holes and edges periodically, particularly after impacts. Graphite can show stress differently to plastic, so routine checks help ensure long-term reliability.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved