Yokomo Y2-003ZAFA Front Bulkhead-Upper Deck Adapter for YD2 and DP Series  [Y2-003ZAFA]

Yokomo Y2-003ZAFA jp
Price:
£8.47
Brand:
Yokomo
Model:
Y2-003ZAFA
GTIN:
639342211845
Condition:
Brand New
Write a review

Upper deck to front bulkhead adapter

This aluminium adapter joins the upper deck to the front bulkhead on compatible 1/10-scale touring and drift chassis. It functions as a replacement mounting piece or as an option to reposition the upper deck relative to the front bulkhead while keeping the chassis configuration intact.

To install: remove the factory fasteners from the front bulkhead and upper deck mounting points, align the adapter to the mating surfaces, and secure it with the original screws. Ensure correct alignment before final tightening to prevent binding of the steering and suspension linkages.

When used for setup changes the adapter modifies deck height and the stiffness between the bulkhead and deck, which can alter handling characteristics. Employ it when repairing an OEM bracket or when refining deck mounting geometry, and always confirm servo and steering arm clearance after installation.

Compatibility

  • DP-GR86
  • DP-GR86G
  • DP-GR86W
  • DP-GRA90
  • DP-GRA90R
  • DP-GRA90W
  • DP-YD2Z
  • DP-YD2ZG
  • DP-YD2ZS
  • RDR-010
  • RDR-010-1
  • RDR-010G
  • RDR-010G-1
  • RDR-020
  • RDR-020G
  • SDR-010
  • SDR-010LTS
  • DP-RZ34
  • DP-RZ34BL
  • DP-RZ34R
  • DP-MS15
  • DP-JZXBN
  • DP-MS15BL
  • DP-RS13SP
  • DP-FCBN
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is DP-RS13SP explicitly listed as compatible?

Yes. DP-RS13SP appears in the compatibility section and the adapter is intended to use the existing mounting points for a correct fit.

Can I reuse the original chassis screws when fitting this adapter?

Typically the factory screws are suitable. Reuse them and verify thread engagement and alignment before applying final torque to avoid damaging the screw holes.

What clearance checks should I perform after installation?

Confirm that the adapter does not move the upper deck into interference with the servo, steering arms, or suspension components. Cycle the steering and suspension through full travel while tightening to ensure no binding occurs.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved