Yokomo Y2-304A Motor Mount, Aluminium, for YD-2  [Y2-304A]

Aluminium motor mounting solution for YD-2 chassis

This aluminium motor mount is supplied as a direct-fit aftermarket component for the Yokomo YD-2 range of 1/10 scale drift chassis. It acts as the structural interface securing the motor and setting alignment relative to the spur/pinion or belt drive. The item is an RC-scale chassis component intended to reduce flex where the motor is mounted.

Fitting is generally simple on supported YD-2 models using the factory motor mount points. Because differences in motor spacing and screw patterns exist between DP and MRTC variants, verify the mount hole pattern against your chassis prior to final installation. The aluminium unit replaces the stock plastic bracket to deliver increased rigidity at the motor attachment.

In tuning terms the mount contributes to more stable motor positioning and repeatability; a stiffer bracket helps preserve pinion-to-spur or belt alignment under load, which can influence drivetrain feedback during drifting. After installation check mesh or belt tension and perform a short run, then recheck alignment to confirm no movement has occurred.

Fit the Y2-304A where you require a firmer motor mount on Yokomo YD-2 models; confirm hole alignment to your chassis variant before final tightening and revalidate mesh after the first test run.