Yokomo YOKGT-04G Carbon Graphite Lower Brace - GT500  [YOKGT-04G]

Yokomo GT-04G - GT500 Carbon Graphite Lower Brace
Price:
£33.47
Brand:
Yokomo
Model:
YOKGT-04G
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - GT category
Write a review

Carbon Lower Brace Designed for GT500 Chassis

The Yokomo YOKGT-04G is a replacement lower brace intended for GT500-scale RC chassis. Fabricated from carbon graphite, it raises torsional rigidity without adding metal mass and is supplied as a direct-fit upgrade on GT500-compatible platforms, altering the lower chassis flex profile to support handling changes.

When fitting, follow the chassis service manual: remove the original lower brace, align this part to the mounting points, and secure fasteners evenly. Observe recommended torque settings so the chassis retains its intended geometry.

On circuit, a stiffer lower brace can reduce chassis twist under corner loads and often improves steering consistency at the limit; treat this as one tool among suspension, tyres, and weight placement adjustments when seeking lap time gains.

Specifications

  • Item: GT500 Carbon Graphite Lower Brace
  • Material: Carbon graphite
  • Model Number: YOKGT-04G
  • Compatibility: GT500

This lower brace is a concise option for tuners wanting to firm the lower section of GT500-class chassis while retaining a low weight profile; validate its impact through measured setup changes.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the YOKGT-04G fit different GT500 kit makers?

Fitment is specified for GT500; differences in chassis layout between manufacturers may affect compatibility. Verify hole spacing against your chassis or ask the vendor for fitment confirmation.

What routine checks should I perform after fitting?

Check fastener torque, examine mounting points for signs of stress, and inspect the brace after impacts to ensure no cracks have developed.

Does the material affect vehicle weight balance?

The carbon graphite construction adds minimal weight; any balance change is small but should be considered when fine-tuning weight distribution.

Is special hardware required for older chassis?

Older chassis revisions may need alternate screws or spacers. Cross-check your chassis manual and the product listing to confirm whether additional hardware is needed.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved