Yokomo YR-22R Rear Roll Shock Mount (Right) for YR-10F [YR-22R]

Price:

£5.20

Brand:

Yokomo

Model:

YR-22R

GTIN:

3888

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - YR10F category

Write a review

Description
FAQ

Right rear roll shock mount specifically for the YR-10F

The Yokomo YR-22R is a replacement right-side rear roll shock mount intended for 1/10 scale formula chassis, explicitly the YR-10F. It interfaces with the chassis' rear roll damper arrangement and is intended for radio-controlled model use.

The mount secures the roll shock to the rear suspension pick-up points and has a measurable effect on chassis roll during cornering. When fitted as part of a setup program it influences how roll forces are apportioned between the rear shock and any anti-roll elements, which assists in balancing front and rear response.

Fitment notes: the YR-22R corresponds to the YR-10F rear mounting points and installs using the chassis' existing rear mount holes and hardware. Ensure you install the part on the correct right side, check alignment with the shock shaft and suspension links, and confirm unobstructed full suspension travel before running.

Tuning guidance: treat the mount as part of the overall roll-control system rather than a standalone stiffness change. Make modest, staged adjustments to shocks, sway arrangement and ride height to assess impact on oversteer or understeer. Always trial modifications on a suitable surface to verify handling changes.

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What checks should I perform after fitting the YR-22R?

After installation, verify right-side orientation, inspect shock and link alignment, and cycle the suspension through full travel to ensure there is no binding.

Is the YR-22R a direct bolt-on for YR-10F or are modifications required?

The part is designed to match the YR-10F rear mounting locations and typically bolts on using existing mount holes and hardware. Always confirm fitment before committing to final setup.