Yokomo YX-24S Rear Axle for YR-X12 Competition 1/12 Chassis  [YX-24S]

Yokomo YX-24S Graphite Rear Axle for YR-X12
Price:
£11.24
Brand:
Yokomo
Model:
YX-24S
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YRX12 category
Write a review

YX-24S Graphite Rear Axle Technical Notes

The Yokomo YX-24S Graphite Rear Axle is supplied as a replacement component for the YR-X12 series of 1/12 competition cars. Fabricated from graphite as indicated, it functions as a direct-fit rear axle used during part replacement, routine maintenance, and setup adjustments.

Installation notes: confirm the axle seats correctly at the YR-X12/YR-X1219 mounting locations and that it pairs cleanly with your existing drivetrain components. Check bearings and fasteners for wear while installing, and perform a slow spin test to ensure proper rotation and seating prior to track running.

Specifications

  • Item Yokomo YX-24S Graphite Rear Axle
  • Material Graphite
  • Model Number YX-24S
  • Compatibility YR-X12, YR-X1219

Compatibility

  • YR-X12
  • YR-X1219

This part offers a like-for-like graphite option for the rear axle on YR-X12 family 1/12 competition vehicles. Verify fitment with your chassis and inspect related parts during installation to ensure reliable performance.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Are mounting screws or spacers included with the axle?

No additional hardware is listed with the axle. Retain or inspect your existing screws and spacers and replace any worn items before completing installation.

How do I inspect the axle for wear after use?

Visually check for surface scratches, cracks, or stress lines along the graphite, and rotate the axle in the chassis to feel for bearing play or roughness; replace if any concerning signs are present.

Will the axle work with aftermarket drivetrains?

It is intended to mate with YR-X12-standard drivetrain components. If using aftermarket parts, confirm shaft alignment and clearance before final assembly to avoid interference.

What is the recommended pre-run check after fitting?

After fitting, verify mounting torque, ensure bearings spin freely without binding, and perform a short low-speed run to confirm the axle sits correctly and there are no unusual noises.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved