Yokomo Z2-018-3A Graphite Rear Shock Tower for YZ-2DTM3/CAL3 - 4mm  [Z2-018-3A]

Yokomo Z2-018-3A Graphite rear shock tower for YZ-2DTM3/CAL3
Price:
£12.92
Brand:
Yokomo
Model:
Z2-018-3A
GTIN:
0639342195374
Condition:
Brand New
Write a review

Improve YZ-2DTM3/CAL3 Cornering with a Graphite Tower

The Yokomo Z2-018-3A graphite rear shock tower is manufactured for use on the YZ-2DTM3 and YZ-2CAL3 chassis. At 4mm thick, the graphite tower lowers the shock mounting point by 3mm, helping to stabilise the car in rapid direction changes and high speed corners.

Material Advantages

Graphite combines low weight with stiffness, giving a firm mounting surface that helps keep suspension response consistent under load while avoiding unnecessary mass at the rear of the car.

Fitment and Use

Specifically shaped for YZ-2DTM3 and YZ-2CAL3 platforms, this tower fits without modification and is a practical option when altering chassis balance or dialing in reduced roll through corners.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I return to the stock tower easily?

Yes, the Yokomo Z2-018-3A installs using the same mounting points, so you can revert to the original tower if you prefer the previous setup.

Will aftermarket shocks fit this tower?

Many aftermarket shocks that match YZ-2 geometry will fit, but always confirm eyelet spacing and overall length to ensure correct geometry after switching parts.

How should I inspect the tower after a crash?

Check for hairline cracks and distorted holes, and replace the tower if any structural damage is found to avoid unpredictable handling.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved