Yokomo Z2-300FL0A Precision Front Lower Suspension Mount for YZ-2  [Z2-300FL0A]

Yokomo Z2-300FL0A Aluminum F Lower Suspension Mount(25?) for YZ-2
Price:
£14.13
Brand:
Yokomo
Model:
Z2-300FL0A
GTIN:
0639342195671
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Suspension Parts category
Write a review

Precision Front Lower Suspension Bracket

This precision-machined aluminum front lower suspension mount is specified for the 2WD YZ-2 chassis and replaces the original plastic lower mount with a durable metal component. The inner arm pin seating is set at a 25 degree skid angle and the edges are finished with a bevel for a tidy look.

As a scale spare, the mount provides a more rigid mounting surface than stock plastic while maintaining original mounting points, and it is compatible with the suspension pins and hardware used on the models listed in the specifications.

Installation mirrors the standard YZ-2 lower mount replacement: remove the front lower arm pins, swap in the aluminium mount, and refit compatible fasteners where suitable. Intended for hobby model applications only.

Specifications

  • Item: Front lower suspension mount (left/right orientation as applicable).
  • Material: Aluminum.
  • Model Number: Z2-300FL0A.
  • Compatibility: B-YZ2T / B-YZ2CAL2 / B-YZ2DTM2 / B-YZ2DTM2S / B-YZ2DTM3 / B-YZ2CAL3.
  • Feature: Inner suspension arm pin arranged at 25 degree skid angle; beveled edge finish for appearance.

Ideal when replacing deformed plastic mounts or when a machined aluminium option is wanted to preserve accurate mounting points and a durable finish on YZ-2 based 2WD off-road vehicles.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How precise is the fit compared with the original part?

The mount is machined to match the original mounting locations and should fit directly on the listed YZ-2 variants without modification, subject to normal manufacturing tolerances.

Are left and right orientations provided or does the part require selection?

The item is supplied to fit the appropriate left or right position as applicable; confirm orientation during installation to ensure correct pin alignment and geometry.

If a mount is damaged, can this be measured to confirm replacement?

You can verify replacement fit by checking key mounting hole centers and the inner arm pin angle against the original part; the specified 25 degree skid angle is useful for confirming correct orientation.

Will the beveled finish change how the part mates to the chassis?

The beveled edges are aesthetic; the mount is machined to the listed mounting points so the finish does not alter functional fit on the compatible YZ-2 models.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved