Yokomo ZC-A3605A 3x6x0.5mm Aluminium Shim Blue  [ZC-A3605A]

Yokomo ZC-A3605A Shim 3x6x0.5mm
Price:
£3.73
Brand:
Yokomo
Model:
ZC-A3605A
GTIN:
0639342197125
Condition:
Brand New
Write a review

Small Shim, Precise Setup

The Yokomo ZC-A3605A aluminium shim is a precision part for getting small suspension differences right. Measuring 3x6x0.5mm and anodised blue, it permits subtle changes to upper arm and mount height that can sharpen handling.

Chassis Compatibility Overview

This shim is compatible with a variety of Yokomo kits such as DP-DIB series, MRTC-BD7RS series and B-MAX2 series. Adding or removing the shim lets you tune load transfer and front-end bite with minimal effort.

Practical Workshop Advice

Ideal for both weekend tuners and seasoned racers, the aluminium construction offers reliable thickness and repeatable results. Keep it in your spares kit to experiment with small setup steps trackside.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How precise are these shims for setup changes?

With a thickness of 0.5mm each, they give predictable, repeatable increments. Use them when you need fine control over ride height or roll centre adjustments.

Do I need to change bolts when adding shims?

Often the existing hardware will work for one or two shims, but longer bolts or washers may be required if stacking several. Always check thread engagement and clearance after fitting.

Any maintenance tips for these shims?

Keep them clean and free of grit to avoid wear on mating parts. Inspect for burrs or damage before reuse and replace any shim that shows deformation.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved