Yokomo ZC-S520A 5x7x0.2mm Adjustment Spacer for YZ-4  [ZC-S520A]

Yokomo ZC-S520A 5x7x0.2mm Spacer for YZ-4
Price:
£1.97
Brand:
Yokomo
Model:
ZC-S520A
GTIN:
0639342219063
Condition:
Brand New
Write a review

Precision 0.2mm Adjustment Shim

For tuners focused on small but meaningful setup changes, the Yokomo 5x7x0.2mm spacer provides a compact option to refine clearances. Its thin profile helps correct minor misalignments and improve component seating without major rebuilds.

Where to Use This Shim

The Yokomo spacer is useful at suspension pivots, gearbox interfaces and bearing mounts where tiny changes affect handling or drivetrain smoothness. Its 0.2mm thickness is intended for subtle corrections, not wholesale geometry changes.

Compatible Yokomo Chassis

Compatibility includes B-YZ4, B-YZ4SF and RSR-010 among others, making it suitable for those who maintain multiple Yokomo cars. Keep a set of shims in your spares kit for quick trackside tweaks.

Tips for Fitting and Checking

Insert the spacer into the target joint and tighten fasteners evenly, then rotate or move the assembly to confirm free operation. After a short test run, recheck fasteners and clearances to ensure the shim delivered the desired result.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How many shims will I get in one pack?

Most packs include six shims, enough for several adjustments or to keep spares in a parts box.

Can I use these to change toe or camber?

These spacers are better suited to bearing and gearbox spacing than major suspension geometry changes; small camber or toe tweaks might be possible depending on location.

Are they reusable after removal?

Yes, if they are undamaged and free of burrs; inspect each shim before reuse to avoid introducing play.

Will stacking two shims cause issues?

Stacking can achieve larger increments but ensure stacked parts sit flat and that fasteners can clamp correctly without inducing twist.

Should I torque components after fitting these shims?

Yes, follow the recommended torque settings for the affected hardware and recheck after a short run to confirm nothing has loosened.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved