Yokomo ZC-T3610A Teflon Suspension Arm Shim 3x6x1.0mm  [ZC-T3610A]

Yokomo ZC-T3610A Teflon suspension arm spacer 3x6x1.0mm
Price:
£5.90
Brand:
Yokomo
Model:
ZC-T3610A
GTIN:
0639342219339
Condition:
Brand New
Write a review

Refine Suspension Feel with Yokomo ZC-T3610A

The Yokomo ZC-T3610A Teflon Suspension Arm Spacer is intended for hobbyists wanting crisper suspension response on touring or drift cars. These Teflon resin shims fit between arm and mount to cut down unwanted friction and help the suspension articulate smoothly under load.

Practical Fitment Notes

They are particularly handy when adjusting wheelbase or fine-tuning arm alignment without adding stiction. Each package contains ten spacers with a 3mm internal diameter, 6mm external diameter and a 1.0mm thickness, making them suitable for many 1/10 scale models.

Teflon for Consistent Movement

The inherent low friction of Teflon keeps pivot action predictable and reduces binding that can upset handling, which is beneficial for track days as well as casual driving sessions.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these spacers fit vintage 1/10 models?

They will fit older models if the pivot uses a 3mm bore and there is sufficient clearance for the 6mm outside diameter; always check against the specific arm geometry first.

Can these spacers reduce noise or slop?

By lowering friction and stabilising pivot contact, they can reduce creaks and give a firmer feel with less perceived slop in the suspension.

How durable are the Yokomo ZC-T3610A spacers?

Teflon is resilient under normal running conditions, but inspect shims periodically for wear and replace if they show deformation or excessive abrasion.

Any tips for installing without changing ride height?

Use thin shims and test with the car on stands to confirm the spacer does not compress suspension preload; stack carefully and recheck ride height after fitting.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved