YZ-4S Graphite Centre Mount Plate - S4-304CPA by Yokomo  [S4-304CPA]

Yokomo S4-304CPA Graphite Center Mount Piate for YZ-4S
Price:
£6.85
Brand:
Yokomo
Model:
S4-304CPA
GTIN:
0639342188390
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YZ-4 category
Write a review

Overview of graphite centre mount

This graphite centre mount plate is intended for the YZ-4S RC chassis and matches the B-YZ4SF chassis mounting layout. It replaces the stock center mount to alter centre-section stiffness and redistribute weight for tuning purposes. Installation uses the chassis' existing mounting points.

When installing, prioritise alignment and controlled torque rather than modifying mounts. Ensure screw holes align with the YZ-4S pattern and secure fasteners to recommended engagement without over-tightening to avoid stressing the graphite. After fitting check drivetrain clearance and that the chassis sits flat on a bench for consistent handling.

Performance impact: fitting a graphite centre plate typically increases central stiffness compared with softer alternatives, which can sharpen turn-in and reduce mid-corner body roll. Make gradual setup changes and use test sessions to evaluate handling, combining the plate with minor suspension or damping adjustments as needed.

Compatibility

  • YZ-4S
  • B-YZ4SF chassis
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How durable is the graphite plate under normal running?

Graphite offers high stiffness but can be less tolerant of heavy point loads; avoid overtightening and inspect for cracks after hard impacts.

Will this change the vehicle's weight distribution significantly?

The plate shifts centre-section mass slightly compared with lighter or softer plates, potentially changing balance; evaluate with test runs and small setup tweaks.

Do I need specific screws or washers for fitting?

Use the chassis' recommended fasteners and apply controlled torque. If using different hardware, ensure correct length and thread engagement to avoid stress on the graphite.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved