YZ-W91TS 2.5mm Graphite Main Chassis for YZ-W91 Compatibility - Yokomo YZ-002GW1  [YZ-002GW1]

Yokomo YZ-002GW1 Graphite Main Chassis (2.5mm) for Works\\\'91 TeamSpec
Price:
£71.22
Brand:
Yokomo
Model:
YZ-002GW1
GTIN:
3888
Condition:
Brand New
Write a review

Direct-fit main chassis for YZ-W91 platforms

The Yokomo YZ-002GW1 main chassis is produced as a 2.5mm graphite replacement specifically for the YZ-W91TS platform. It prioritises predictable stiffness and keeps all mounting points in the original positions so the only changes to handling come from altered rigidity, not from modified geometry.

Assembly is simple on YZ-W91TS and YZ-W91 vehicles that retain stock mounting hardware. When replacing the original chassis, confirm alignment of the motor mount, servo and battery tray before final tightening. Because plate stiffness alters steering feedback and weight transfer, re-evaluate setup settings after installation.

Specifications

  • Item Main chassis
  • Material Graphite
  • Model Number YZ-002GW1
  • Compatibility YZ-W91TS, YZ-W91

This graphite main chassis offers a 2.5mm stiffness option for YZ-W91TS and YZ-W91 builds to fine-tune rigidity without changing factory mounting layouts.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this chassis change mounting locations compared with stock?

No. The YZ-002GW1 preserves the original mounting points so it fits directly into YZ-W91TS and YZ-W91 layouts without relocating hardware.

Are there fit differences between YZ-W91TS and YZ-W91 models?

Both platforms share the same mounting pattern covered by this chassis; verify component alignment during installation to ensure motor and servo positions match your build.

Should I change fastener torque values when using graphite?

Standard torque settings are generally suitable, but recheck fastener tightness after initial runs since a stiffer chassis can transfer loads differently to mounts.

Any last checks before returning to track?

Confirm motor, servo and battery tray alignment, retorque all chassis fasteners and inspect for any sharp edges that could contact wiring or components.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved