Yokomo Z2-201DSB Aluminum Steering Bell Crank Set for YZ-2DTM2  [Z2-201DSB]

Yokomo Z2-201DSB Aluminum steering bell crank set (Dirt) for YZ-2DTM2
Price:
£17.52
Brand:
Yokomo
Model:
Z2-201DSB
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Chassis Parts category
Write a review

Replacement aluminium bell crank for YZ-2DTM2 platforms

This aluminium steering bell crank set reflects the layout found on the YZ-2DTM2 and is designed to influence steering geometry for low-grip conditions. With its specific Ackermann setup, it is better suited to dirt and similar loose surfaces, helping the chassis hold a more predictable line through bends.

The aluminium component replaces the standard plastic assembly to reduce flex and increase repeatability under load. It is supplied as a direct-fit option for the listed YZ-2 variants and connects to the same steering mounting points as the original equipment to preserve alignment settings.

Be aware that this variant uses a different pillow ball arrangement than the World Edition; the two versions are not identical in pillow ball specification.

Specifications

  • Item: Aluminum steering bell crank set (Dirt)
  • Material: Aluminum
  • Model Number: Z2-201DSB
  • Compatibility: B-YZ2DTM2, B-YZ2, B-YZ2CA, B-YZ2DT, B-YZ2DTM, B-YZ2DTMW, B-YZ2CAL2, B-YZ2T, B-YZ2DTM2S

Fit this aluminium bell crank to sustain consistent steering feel on loose surfaces and to replace the stock plastic assembly with a more robust alternative on supported YZ-2 models.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which listed YZ-2 variants will accept this bell crank without modification?

The bell crank is intended as a direct-fit for the variants shown in the compatibility list and uses the same steering mounting points; verify your chassis code against that list before ordering.

How does this version differ from the World Edition bell crank?

This release differs in pillow ball arrangement from the World Edition, which means interchangeability of pillow ball parts and their seating may not be the same between versions.

Are there fitment notes when upgrading from plastic to aluminium?

Fitment is designed to be straightforward, but check pillow ball seats and fastener torque during installation and confirm steering geometry after the swap to maintain handled setup.

Can pillow ball parts be interchanged between versions?

Because this version uses a different pillow ball arrangement than the World Edition, some pillow ball components may not be interchangeable; inspect mating surfaces and confirm fit before mixing parts.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved