Yokomo Z2-415SH3A Hard-Type Steering Block for YZ-2DTM3 and CAL3  [Z2-415SH3A]

Yokomo Z2-415SH3A Steering block L/R (Hard type) for YZ-2DTM3/CAL3
Price:
£5.25
Brand:
Yokomo
Model:
Z2-415SH3A
GTIN:
0639342216703
Condition:
Brand New
Write a review

Hard-Type Steering Block from Yokomo Z2-415SH3A

The Yokomo Z2-415SH3A steering block is developed for the YZ-2DTM3 and CAL3 platforms and is formed in a harder resin to enhance steering precision. The firmer material delivers clearer feedback to help drivers refine handling at the front end.

Swap Blocks to Change Tie Rod Height

By exchanging the left and right blocks you can alter the tie rod attachment height, which is a practical way to adjust bump steer and tailor front-end behaviour for different setups.

Listed Compatible Chassis

Suitable Models

  • B-YZ2DTM3
  • B-YZ2CAL3
  • B-YZ2DTM31-1
  • B-YZ2CAL31-1
  • SOR-010
  • ROR-010
  • ROR-010RTR
  • ROR-010RTR-1
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Yes, the firmer resin is chosen to provide more consistent steering response under regular competitive running and tuning sessions.
Make small changes to tie rod height and test on short runs, observing turn-in and mid-corner behaviour, then refine until balance is achieved.
Any change in tie rod position can alter toe under suspension travel, so re-check alignment and adjust toe as required after fitting.
Look for cracks or distortion around the mounting holes and bearing seats; replace the block if you see any structural damage to maintain safe handling.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved